![]() The two independent five-digit distance counters of the Monit G-100 + can be quickly zeroed or preset to an initial value using the simple menu system. When the satellite signal is reestablished, the operation switches back to GPS without major problems and if there was no wheel probe connected, the unit would add the distance in a straight line between the place where the connection was lost and it recovers. If the satellite signal is lost, the GPS + software automatically switches to the wheel sonar signal as a reference and measurements will continue without interruption. ![]() In the background, the GPS + software continually calibrates the wheel or speed sensor with GPS measurements. If a satellite signal is available, the Monit Rally works with GPS + only, eliminating the need for time-consuming calibration and the error caused by wheel spin. How the GPS + wheel probe combination works Monit Rally G + products can also work with a traditional wheel probe as an auxiliary element in the event of any GPS problem, or when it is not authorized in the competition. The chip and antenna use three satellite systems: GPS, Glonass, and Galileo, ensuring accurate information capture regardless of conditions: narrow valleys, tree-covered paths, urban canyons (when very tall buildings block the satellite's visibility ). Monit Rally's G + range is the new generation of tripmaster, easy to install thanks to the integrated high-sensitivity GPS receiver (antenna sold separately), which provides more accurate and reliable information. Optional Recce Car Kit comprises of a suction mount bracket, a wiring loom to connect to the cigarette lighter adaptor adn a reset button.Tripmaster Monit Rally G200 + with GPS function. This is an additional item that must be purchased seperately. The small size and weight also makes mounting the G-Series inside a vehicle much easier, and the plug in wiring loom makes it easy to swap between vehiclesĪll G-Series units require an external antenna to receive GPS signal. the G-100 is aimed at the entry level competitor who require only basic functions while the G-200 is fully featured and includes time of day clock and a fuel level measurement system. There are two models within the G-Series. ![]() This timer starts automatically when the vehicle moves from the startline.ĭistance and clock settings are maintained for up to two weeks if mains power is removed. Simply press the switch at the stage end to record distance, time, average and maximum speeds. ![]() This means that accurate operation can be maintained even in tunnells or very dense forest cover where the satellite signal may be degraded.Ī new software function allows convenient recording of stage data using a foot switch input. If both are used the prepriority GPS+ software automatically switches over to the wheel sensor if the GPS signal is lost. The G-Series can measure distance and speed using either the GPS satellite signal or a traditional wheel speed sensor, or both. ![]() The receiver uses an external roof mounted antenna that provides excellent reception in most enviroments Integrated GPS Receiver: The high quality internal receiver fits into the same casing as the original T-Series making the G-Series extremely compact and easy to install. This allows the unit measure distance and speed without the need of a traditional wheel speed sensor, greatly simplifying installation and improving reliability. The new G-Series has all the featured of its predecessor with the addition of a high-sensitivity GPS receiver. The new Monit G-Series has replaced the successful T-Series. ![]()
0 Comments
Leave a Reply. |